 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » DB App. |
| View Profile: DB App. | |||||
|
|||||
Maytag Neptune load unbalance - clutch greaseI made the same mistake. The grease is causing the one way clutch to drag. Clean out the grease, apply a light oil like the old 3 in 1 oil and the problem will go away. |
|
Maytag Neptune load unbalance - clutch grease The clutch must be rusted on the input shaft pretty good! Gentle prying and tapping may break the rust loose and let the clutch come off the input shaft. As far as the tranny bolts, do not use an... |
|
Maytag Neptune load unbalance - clutch grease Sorry to hear the upper control board did not fix your timer problem. The clutch is not related to this problem. |
|
Maytag Neptune load unbalance - clutch grease Also stay with dh1200s on any advice. he knows more about these machines than the fellows that designed them. He does work nights, so be patient on the reply time. Dave |
|
Maytag Neptune load unbalance - Control Board I looked my board over with a 10X magnifing glass and could not see any burn spots or board damage. One of those "black box" computer chips is the timer. The board is serviced as an assembly of... |
|
Maytag Neptune load unbalance - TL Repair I think you will find that the control board in the upper console is the problem with your clock stopping at 24 minutes. Mine did the same thing. I did the same steps you did, except my clutch held.... |
|
Maytag Neptune won't spin, buzzes - No Spin Check the wiring and L/S lock assembly. ( the bleach side) Spilt bleach corrodes the wiring / lock assembly over time and may be part of your problem. This is all tucked under the main lid housing.:) |
| Forum Info | Contact Info | |
|
Join Date: 06-10-2011
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
