 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Dave_S |
| View Profile: Dave_S | |||||
|
|||||
Dryer tearing off buttonsI replaced the two glides and took a look at the felt. The felt is compressed down, but its still there. The glides were completely missing. There is still too large a gap between the drum and the... |
|
Dryer tearing off buttons Thanks. I ordered the glide. With how expensive the felts are, I'll wait until I open it up to order them. Hopefully this will be it. How would I know if the bearing went bad? |
|
Dryer tearing off buttons - Dryer tearing off buttons A piece broke off of the dryer and was thrown out before I saw it. I'm told "its a round piece on the front". The dryer now tears off buttons and has a horrible grinding sound when its run. I... |
|
ignitor glows, bake not working, smell gas - Dryer tearing off buttons I don't have an amp probe. My multi-meter does volts (ac /dc) and resistance. Would you advice purchasing an amp probe, or just replacing the ignitor? the amp meter is more expensive than the ignitor. |
|
ignitor glows, bake not working, smell gas - ignitor glows, bake not working, smell gas As indicated in the title, when we turn the oven on bake the ignitor glows, and we smell gas. I inspected the wires to the ignitor and they are all in good shape. The resistance on the ignitor is... |
|
Oven on range does not work on bake - ignitor glows, bake not working, smell gas When I went to disconnect the igniter, i found a quick connect running from the electrical to the valve that had broken off. I cut the wire and replaced the connector. My oven once again... |
| Forum Info | Contact Info | |
|
Join Date: 02-10-2009
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
