Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > View Profile » copiercop

View Profile: copiercop
copiercop is on a distinguished road
copiercop copiercop is offline
Junior Member
 
Last Activity: 05-23-2014 05:32 PM 

FAV6800A/FAV9800A Outer Tub bearing replacement
Hi Dick, yes I did. The bearing was a bit of a bugger for the mechanic. Getting it out actually flanged open the end with the need bearing. He was able to close the gap a bit in a vise to allow the...
FAV6800A/FAV9800A Outer Tub bearing replacement
Done!...phew, what a project. All spin tests passed with flying colors. I took the outer tub and the spinner assembly to an auto mechanic. He remove and replace the bearings in a matter of minutes. I...
FAV6800A/FAV9800A Outer Tub bearing replacement
Hi Dick,

The silver elastic ring I removed was in my tub seal pic. It was seated around the lip of the seal. Not the outermost part of the seal, but about half to three-quarters of an inch in from...
FAV6800A/FAV9800A Outer Tub bearing replacement
Hi Dick,

I will proceed with your suggestions.

BTW, I thought I remembered taking out a black plastic ring which I believed to be the tranny o-ring....It may have been in pic 1 of permalink 2 and...
FAV6800A/FAV9800A Outer Tub bearing replacement
Hi Dick,

I've attached a pic of the wire elastic ring I had mentioned, 3rd pic. The last pic shows where it was located.

How do I remove the shaft in pic 2? Seems loose, don't want to yank on...
FAV6800A/FAV9800A Outer Tub bearing replacement
Hi Dick,

Finally!...I've removed the spinner nut referencing permalink #106. I removed the sleeve from the old tub seal. Do I simply tear off the old tub seal? It seems to be on pretty...
FAV6800A/FAV9800A Outer Tub bearing replacement
Hi Dick,
I will purchase the locking ring and spanner wrench and try to go that route first and see where that gets me. I'll keep you posted.

Thanks for all your help,
Johnny
Forum Info Contact Info
Join Date: 09-16-2013
Posts
Total Posts: 14 (0.04 posts per day)
Last Post:
FAV6800A/FAV9800A Outer Tub bearing replacement
09-23-2013 06:19 AM
Find all posts by copiercop
Find all threads started by copiercop
Referrals: 0
copiercop has no contact information.
Additional Information Group Memberships
N/A
copiercop is not a member of any public groups


All times are GMT -7. The time now is 11:59 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17