 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » clay cunliffe |
| View Profile: clay cunliffe | |||||
|
|||||
cant seem to balance a load - cant seem to balance a loadseems like every load no matter how we arrange clothes. washer bangs and walks across floor. what should I look for. |
|
dryer runs but will not dry clothes - cant seem to balance a load gene thanks for your help. your first suiggestion was right. I forgot to turn gas back on after replacing parts. you have been very helpful and thanks again for your time and helpful info. |
|
dryer runs but will not dry clothes - cant seem to balance a load gene sorry I made a mistake. the igniter ohm check was 84.6. the flame sensor was 00.5 at the terminals and I did have continuety between terminals. |
|
dryer runs but will not dry clothes - still no heat replaced igniter and coil pack as you recommended. still have no flame. flame sensor ohm check was 84.6. igniter glows then clicks and shuts off then repeats. valves are not chattering any more since... |
|
clothes wont dry - clothes wont dry replaced igniter and valve coil 2 pack new style. flame sensor reads at 82 ohms. valves are not chattering anymore but flame will still not light. does cylinder have to be installed. what to do next.... |
|
dryer runs but will not dry clothes - dryer runs but will not dry clothes ignitor glows but gas valve will not open. after glowing a short time I hear a click then ignitor will shut off and process repeats. could this be the flame sensor or is their other components that... |
|
haeting problem - dryer runs but will not dry clothes Please click one of the Quick Reply icons in the posts above to activate Quick Reply. |
| Forum Info | Contact Info | |
|
Join Date: 06-29-2009
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
