Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > View Profile » brobriffin

View Profile: brobriffin
brobriffin is on a distinguished road
brobriffin brobriffin is offline
Senior Member
 
Last Activity: Today 09:42 AM 

Washer Repair
When the unit is supposed to be spinning do you hear the motor running?
1. No - then its likely the lid switch going bad.
2. Yes - then its likely the coupler thats bad
If coupler see part 13
Parts...
Dryer Vent Pipe
Also FYI most dryer manufacturers stipulate in the user manual that homeowners should clean the dryer vent system at least every two years and most manufacturers recommend annually
As a retired...
Dryer has no heat.
You can get a cheap multi-meter @ harbor freight or places like that
It would be money well spent and a time saver also
Just replacing arbitrary parts in hopes you happen to replace the right one is...
Washer spin cycle
A number of things could be wrong. (sorry for the late answer)
First thing is get out the tech data sheet and go into diagnostic mode and see if there are any error codes.....
Your tech data sheet is...
Dryer has no heat.
Gman48
those suggestions are just generic starting points...
Do you have or know how to use a multi-meter?
Plastic in my washer
If the bottom of the tub is broken and you have to replace the basket and hub assembly that is very expensive.
GE WH45X10060 Basket & Hub Asm - AppliancePartsPros.com...
Dryer Vent Installed Correct?
To answer the question ref "improper material"
The flex hose you have going through the wall, whether its aluminized paper or vinyl (plastic) ducting is not to code. You must use either a rigid or...
Forum Info Contact Info
Join Date: 06-13-2014
Posts
Total Posts: 766 (0.57 posts per day)
Last Post:
Dryer Vent Installed Correct?
02-12-2018 11:46 AM
Find all posts by brobriffin
Find all threads started by brobriffin
Referrals: 0
Additional Information Group Memberships
Location:
Florida
Interests:
appliance repair
Occupation:
Retired firefighter
brobriffin is not a member of any public groups


All times are GMT -7. The time now is 10:53 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17