 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » BrianVamvakias |
| View Profile: BrianVamvakias | |||||
|
|||||
Jenn Air not workingGene, Thanks for your help, but I am done with this oven and will replace it. It put in a good 30 years of service. I wish I knew someone local who could use the range components because they... |
|
Jenn Air not working Gene, I found a wiring diagram in the control panel. I recreated it with paint. The top was pretty scorched, so it may not be accurate, but I think I have it pretty close. Hopefully others can... |
|
Jenn Air not working Hi Gene, Ok. I will work on removing the ducting so I can pull it from the wall and try to get access to the back. Do you know if the wiring from the control panel to the baking element is... |
|
Jenn Air not working Hi Gene, Actually, I did test it at the terminal block because I could not get to the plug. The unit is ducted into the floor and I cannot pull it away from the wall. Part of the frame is against... |
|
Jenn Air not working - Jenn Air not working Hi, thanks for the reply. Sorry it took me so long to respond. I checked the plug to the oven and I get 126V per line to ground, 248V across both . A little more than 110/220 V, but I don't know... |
|
Jenn Air not working - Jenn Air not working I replaced the lower oven element in my Jenn Air and was not careful with the ground wire placement. When I tested the oven, it shorted and threw the breaker. I removed the element, checked it with... |
| Forum Info | Contact Info | |
|
Join Date: 01-13-2013
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
