| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Bob1958 |
| View Profile: Bob1958 | |||||
|
|||||
|
Thanks for the help...I'll get to this next weekend and report back to see if I can determine what parts to order. |
|
This Whirlpool is having intermittant spinning issues on the rinse cycle. Sometimes it spins, sometimes it doesn't. If it doesn't spin and I reach in and turn the drum once by hand and shut the... |
|
I'm installing a new Bosch dishwasher. The drain hose that came with it didn't fit my gargage disposal so I tried to use the old hose. The short story result is that I slightly damaged the round on... |
|
For the benefit of anyone else that has this problem, it has been solved. The start button on this Kenmore (Whirlpool) had to be pushed numerous times before it would work. Although the cleaning... |
|
Was the unit put in after the counter was installed? If so, which should be the case, then if was pushed in there must be a way to get it out. Are you sure there's not something else stopping the... |
|
Took the unit apart, cleaned all the connections, checked the ribbons, installed a new control board (had an extra here). No change, so it's probably the interface. Now I have to consider spending... |
|
Thanks for the help...much appriciated. When you say "control board" I assume you mean the larger control part (Part No. 8534963) and not the part directly under the buttons called the "user... |
| Forum Info | Contact Info | |
|
Join Date: 10-31-2011
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|