 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » blkrx8 |
| View Profile: blkrx8 | |||||
|
|||||
Kenmore Elite HE4t getting VERY hotI am stuck and need advice...I have also installed a new thermal cut out kit and set the dryer to AIR DRY...turn on and the element immediately turns bright red. I am about to the point of buying a... |
|
Kenmore Elite HE4t getting VERY hot I have replaced the heating element and have the same results. Even on AIR DRY the element glows bright red . Any suggestions ?? |
|
Kenmore Elite HE4t getting VERY hot Ok. I have ordered a new heating element. Hoping this fixes the problem. Thanks for your assistance. |
|
Kenmore Elite HE4t getting VERY hot Hose is 3ft or so. Checked the continuity as suggested. On the top lead I get NO beep but on the bottom lead I get a beep. I could not see any obvious sign that the element was touching but I guess... |
|
Kenmore Elite HE4t getting VERY hot - Kenmore Elite HE4t getting VERY hot Dryer started getting VERY hot regardless of heat setting. Sometimes to the point that you can not touch the clothes. Here is what I have tried so far. Took the hose off and cleaned inside the... |
| Forum Info | Contact Info | |
|
Join Date: 09-14-2012
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
