| Register | FAQ's | New Posts | Today's Posts | Extras |
| » bkrame |
| View Profile: bkrame | |||||
|
|||||
|
GLEN65, I received the new pump and motor. If I posted images of the old and new assemblies would you be able to assist me in properly matching up the electrical connections? Thanks, Bill |
|
GLEN65, OK, Weekend #2.... So I took the D/W out from under the counter and put it up on blocks so I could get a good view and ran it. It's for sure not just a hose...darn. Anyway, the leak is... |
|
Wow, that was a fast reply, thanks! I take it the photo is of the assembly upside down? Is there a part number for the assembly/kit and do you know the cost? Thanks, Bill |
|
Hi, My mother in law has a GE profile D/W model gsd4910x66a that is leaking from the bottom during discharge only. I did take photos of the part that was leaking as I was watching during the cycle... |
|
Thanks for the info. When I first disassembled the dryer I took those screws off and re-tightened them. I had already determind that if the motor cost was over $100 it might not be worth replacing... |
|
Tom, Again thanks for the reply. What is the cost and the P/N for the motor? Bill |
|
Tom, Gene, I replaced the bearing sleeve and the dryer sounds the same. Thoughts? Bill |
| Forum Info | Contact Info | |
|
Join Date: 10-07-2008
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|