| Register | FAQ's | New Posts | Today's Posts | Extras |
| » betthinks |
| View Profile: betthinks | |||||
|
|||||
|
Hi again. My internet has been out for three days, thus no responses lately. The news is not good. I tried to do the Ohm meter thing, but got so confused about where to put the test points. I... |
|
I just have to get a hold of a voltmeter from someone I know or find one at a really good price. Thanks again. I will follow up and let you know what happens. I just want so bad to avoid spending... |
|
Not the answer I was hoping for. Those darn things are expensive, and then what if it is not that? Is a short in a wire something that should be considered? If so, how do I check that? thanks... |
|
I got the new lid switch and installed it, but no luck. The machine simply will not respond to being turned on. No fill, no agitation, no nothing. What would be the next best thing to check? ... |
|
Thank you so much. I kind of wondered about the "tubing" thing. I have ordered a new lid switch and we give that a try. Let's hope that is the problem. Thanks again. Betty Hinks |
|
Originally, the machine filled and agitated, then stopped. The lid switch had come apart, we discovered when we opened the cabinet. When the pole hit the switch, it sort of "fell down" under the... |
|
Thanks so much. I got the same message from someone else who knows washers, so it seems we are back to the lid switch. He said if it failed, the machine would shut down and not operate at all.. Do... |
| Forum Info | Contact Info | |
|
Join Date: 06-30-2009
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|