| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Bernie157 |
| View Profile: Bernie157 | |||||
|
|||||
|
The microwave oven seems to have quit altogether now. I have order a new, smaller one online and hope to have it tomorrow. They are supposed to take the old one away. Bernie |
|
Thanks again, Simon. I will have to remove the cover and try to figure how to tape that switch in place if I can. I was considering if I should remove that whole assembly which holds the 3 switches... |
|
Simon, I appreciate your replies and advice. Since the machine no longer runs the fan or makes any other noise by merely opening the door, I can't see the harm of leaving it as I have it. I tried... |
|
I have removed and taped the end of one wire from the top-most switch, then put the outer cover back on. The machine seems to be performing correctly except when done heating something, the "End"... |
|
Another P.S. When I remove one connecting wire from either the top #1445 or the bottom #1445, then the machine works normally. It does NOT run when I merely open the door and it DOES run when I... |
|
P.S. I just spent some time chatting with Brandi and now understand and have access to the switches (diagram #1445 & 1446) that might be faulty. Or is it possible they are out of position or have... |
|
I see the part number twice in the parts list, once with #1445 and once with #1446, same price. In the diagram I find #1445 inside the microwave on the left side, but I don't see anything like that... |
| Forum Info | Contact Info | |
|
Join Date: 01-15-2013
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|