Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > View Profile » bentwrench1999

View Profile: bentwrench1999
APP Volunteer
bentwrench1999 is on a distinguished road
bentwrench1999 bentwrench1999 is offline
Senior Expert
Last Activity: 02-18-2009 09:38 PM 


Deb - Deb
Hi and welcome to the forum./ To unlock your d/w simpley press and hold the ENERGY SAVER DRY pad for 4 seconds. Repeat this step to lock it also.:) wrench
Took like a country boy? - Took like a country boy.
Your d/w is probabley O.K. Replace the thermal fuse with pt # AP3178588 available from this site. You'll relocate the fuse and harness to prevent further failures.Good Luck..wrench:)
Installing drum bearing - Installing drum bearing
You Are Right On. It Goes Towards The Front Of The Dryer. Lube On The Ball Keeps It In Place. Good Luck....wrench:)
Appliance Color Codes - Appliance Color Codes
Hey guys, does anyone have a source for determining color codes on appliances. In example, Whirlpool uses "B" for black - and "T" for Bisque, etc. Frigidaire uses "S" for White. Any help? Thanks:) ...
Mystery part - Mystery Part
Welcome to the forum. The part you are describing is the top spinner. Look at the ceiling of the d/w. This is where it goes, however you need to replace the assembly. The rivet is missing so replace...
Roper Dryer wont start - Roper Dryer wont start
Welcome Scott. Your dryer has a thermal fuse on the rear panel. Remove the back panel and look for a ceramic (white) component attached to an air duct. It's stamped with a # 3392519. It's about 3/8"...
Standpipe size and drain flow rate - Standpipe size and drain flow rate
Hello. I'm guessing your new machine is a top load. These use ($)18-22 Gallons of water per fill. The Neptune is only 4 Gallons per fill. That's why the Neptune operated O.K.. I'm betting the drain...
Forum Info Contact Info
Join Date: 12-14-2007
Total Posts: 72 (0.02 posts per day)
Last Post:
Standpipe size and drain flow rate
02-12-2008 12:01 PM
Find all posts by bentwrench1999
Find all threads started by bentwrench1999
Referrals: 1
bentwrench1999 has no contact information.
Additional Information Group Memberships
bentwrench1999 is not a member of any public groups

All times are GMT -7. The time now is 12:19 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17