 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » benj |
| View Profile: benj | |||||
|
|||||
problem removing gearcase cover sealFound a way to do it -- I put it on top of a propane grill. After the flames stopped I saw that what remained of the cover seal had fallen out. |
|
problem removing gearcase cover seal Yes, the part I'm having trouble with is part #3 in the diagram (MFG Part Number 3349985) called "shaft seal". It's on top of the gearcase cover and the spin/agitator shaft goes through it. I was... |
|
problem removing gearcase cover seal - problem removing gearcase cover seal I've been rebuilding the gearcase on a whirlpool WTW5505SQ1. I'm having trouble removing the cover seal - it seems to be attached with gasket sealer and it's coming off in pieces. Help appreciated. |
|
gearcase oil - gearcase oil I'm wondering if car transmission oil is ok to use for the gearcase on this machine? (Whirlpool - WTW5505SQ1) Thanks. |
|
pump bad? - pump bad? This is a real old washing machine (it can be found on microfiche). It seems like the pump is bad. I'm including a picture of the pump. Would appreciate information on how to verify that the pump is... |
|
washer not draining - washer not draining We've got a whirlpool washer model LAC4900K5. I replaced the belt on it about 7 years ago. It recently stopped being able to drain the water out. Would this mean it needs a new pump? I haven't been... |
|
bad thermal overload? - washer not draining Thanks for the info. Unfortunately, the compressor blew out. I ran it for maybe 1 1/2 hours and the frig temp got down to 40F. The freezer was down below 20F. I turned it off but then decided to turn... |
| Forum Info | Contact Info | |
|
Join Date: 04-26-2012
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
