| Register | FAQ's | New Posts | Today's Posts | Extras |
| » ajm1979 |
| View Profile: ajm1979 | |||||
|
|||||
|
I have a kenmore front load washer that is not pumping out all the water. I took the pump out to be sure no blockages. Pump makes a weird sound though when running(like gravel is in the pump)and the... |
|
I wanted to follow up with my fix. The part that was causing the washer not to operate at all was the reed switch. If you recall this ended up being the part that I must have damaged when i tried... |
|
Thank you, I will order both parts just to save time as you said. Yes, I have ordered all my parts from this site. It is great to be able to order more than one knowing you can return it if you do... |
|
Hi, Thanks for your reply. The manual you sent was more helpful than the tech sheets that were inside the washer. For my problem "washer not operating" it gives me two options when the timer knob is... |
|
My washer originally was not spinning. After consulting with a on line tech we decided it could be a door latch switch or a timer. So being one that wanted to pursue it more I seen a test that... |
|
Please help, I have replaced three parts in my Kenmore front load washer. First I ordered a timer and door lock switch. It could have been one of those if i did not proceed to try a test which i... |
|
I ran through the tech sheet like you said last night and it is leaning to the speed control board that may be bad. It seems when I do the ohm yeast on the 6 pin connection on the board it dips to.2... |
| Forum Info | Contact Info | |
|
Join Date: 08-16-2011
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|