Heating, Ventilation, and Air Conditioning (HVAC)

Mike Roberts · #1 (**permalink**) 08-25-2007, 05:46 AM

No power on entire hood after electrical storm. No blown circuit break on house panel so suspect blown fuse in vent hood, but can't locate the fuse. The parts blow up is no help at all, nor are the owner's manual or installation instructions that came with the hood. Can anyone tell me where the fuse is located ?

Matt / APP Team · #2 (**permalink**) 09-19-2007, 07:43 PM

Click for parts breakdown.

Click for fuse.

The fuse is # 170 on the diagram and will probably be located inline between the power supply block and the control board/area.

Edward32 · #3 (**permalink**) 10-15-2009, 04:00 PM

Chances are there is no fuse on your vent hood. if your sure its burnt...its not costly to replace.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GE downdraft vent system	R Grubb	Oven Repair (including Ranges and Cooktops)	3	05-07-2009 03:06 PM

Vent Hood Repair

Heating, Ventilation, and Air Conditioning (HVAC)

No power on entire hood after electrical storm. No blown circuit break on house panel so suspect blown fuse in