|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Furnace bangs during ignition |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
11-28-2009, 06:51 AM
|
|||
|
|||
Furnace bangs during ignition
Model Number: GCU090C35C Brand: Amana Age: More than 10 years
The furnace intermittently bangs during ignition as if to much gas is building up. Could this be the igniter is not getting hot quickly enough and a new igniter is needed?
Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
11-29-2009, 10:09 AM
|
|||
|
|||
|
Sounds to me like the burners need inspection. Either you have a big hole or plugged holes in the burners from rust; causing pooling up of combustables.
Remove the tubes and brush them, Get the rust out and inspect for holes and busted seams.
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Tub bangs against side while agitating/spinning | sua51 | Washer Repair | 1 | 10-31-2009 06:07 PM |
| Washer Bangs, but not all the time | eolson | Washer Repair | 0 | 04-30-2009 05:46 PM |
| Maytag bangs in spin cycle | JBS1924 | Washer Repair | 1 | 03-28-2009 01:26 PM |
| When spinning it bangs and slows down.... | jdrtt1 | Washer Repair | 0 | 02-27-2009 09:38 AM |
| loud spin bangs | marytony | Washer Repair | 5 | 03-30-2008 04:37 PM |
Linear Mode
