|Register | FAQ's | New Posts | Today's Posts | Extras|
How to unmount Ventilation Fan Parts from Ramge Hood
Model Number: KWCU205HWH1 Brand: Kitchen Aid Age: 5 - 10 years
Recently my Vent Hood is noisy when I turned on the fan.
So I checked the kitchen aid web site and it says it probably caused by Motor
I did purchase.
But the problem I face now is how to remove the fan.
There are so many screws and there is no manual describing how the cylinder shaped ventilation is attached to the hood.
I see the parts diagram but It does not tell me the proper way to disassemble.
Some screw cannot take out due to the too narrow space.
I took the photo inside my range food and I am not sure if I can simply unscrew the big (inside red in the picture)
What is the best way to try clean the parts and replace for this model inside fan (cylinder shape)
I looked at the Costco similar model but it seem to be much easier to disassemble this model make me headache.
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|retractable ventilation email@example.com||Heating, Ventilation, and Air Conditioning (HVAC)||2||01-07-2012 11:54 AM|
|thermador ventilation||hbelderjr||Oven Repair (including Ranges and Cooktops)||0||06-04-2010 10:21 AM|
|Downdraft ventilation||mmrozek||Heating, Ventilation, and Air Conditioning (HVAC)||0||04-15-2009 05:19 PM|
|Range Ventilation hood runs backwards||fireman-175||Heating, Ventilation, and Air Conditioning (HVAC)||2||03-14-2009 09:04 AM|
|thermador stovetop ventilation||shuster||Oven Repair (including Ranges and Cooktops)||0||11-23-2008 11:23 AM|