Rank: Member
Groups: Registered
Joined: 4/22/2012(UTC)
Posts: 1
|
"Hello. I have a Commercial Cool (Haier) portable A/C, heater, dehumidifier, fan unit. The model number is CPA14XHJ-B. I would just like to open the case so I can clean the inside. On the back side there are several phillips head screws that can be removed. However, there are two "screws", each located under the filter holder in deep holes. They look like Allen head but I can't get anything to fit in them. I have no idea what they are or how to get them out. Any help would be greatly appreciated. Thank you.
Craig
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638
Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
|
I am not sure but they are probably Torx see the following. Torx - Wikipedia, the free encyclopediaNote that there are two types of torx. One has a raised pin in the center (security torx) so the bit is hollow. If you can find it I would get this type as it is more versatile. Hardware/auto/lumber stores carry them. Youir big problem will be finding a set that will fit into the deep hole. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
