General Talk

witwister · #1 (**permalink**) 04-24-2008, 06:48 PM

I have a ge tfx22pme refrigerator and I wasn't getting water to the icemaker. I replaced the water valve but the problem is not resolved. Is there a switch that could be bad to let the valve open and shut and if so where is it located and how is it activated?

richappy · #2 (**permalink**) 04-25-2008, 08:48 AM

I would put 115 volts to the ice maker water solenoid and see if the ice maker mold fills up with water, seven seconds should do it. If not, you have a frozen fill spout in the freezer, probably due to the freezer being too cold, or the condensing coils clogged.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GE Profile refrigerator-warm freezer & refrigerator	ykim4492	Refrigerator & Freezer Repair	2	02-14-2010 05:52 PM
GE Profile Refrigerator - freezer cold but refrigerator not	EricNJCPA	Refrigerator & Freezer Repair	1	11-23-2009 05:51 PM
Refrigerator not working and the freezer works as a refrigerator	myster	Refrigerator & Freezer Repair	2	10-22-2009 11:28 AM
amana refrigerator not frezzing and refrigerator not cooling	didhebiteyou	Refrigerator & Freezer Repair	0	08-09-2009 09:43 AM
Amana Refrigerator Freezing in Refrigerator	cdodson1	Refrigerator & Freezer Repair	4	05-10-2009 08:12 PM

ge refrigerator

General Talk

I have a ge tfx22pme refrigerator and I wasn't getting water to the icemaker. I replaced the water valve