General Talk

tward · #1 (**permalink**) 12-05-2007, 12:53 PM

du1055f lite is blinking and will not start. I check heating ele. should read 10 to 30 ohms it shows 9 ohms.fuse is good,temp switch is good.Need help

Gene · #2 (**permalink**) 12-05-2007, 01:20 PM

What light is blinking? Clean?

Did you check the hi limit thermostat?

Gene.

tward · #3 (**permalink**) 12-05-2007, 01:32 PM

Hi, I check one thermostat on the bottom of the tub it was closed.

Gene · #4 (**permalink**) 12-05-2007, 01:53 PM

You can find the full description on this problem and how to fix it in the Whirlpool [URL="https://secured.whirlpool.com/Service/SrvTechAdm.nsf/d12cd4888abce86285256a42005ea985/3976dc6fea92e1c385256fc4006611c9/$FILE/8178496.pdf"]service pointer[/URL] and [URL="http://www.servicematters.com/docs/wiring/Tech%20Sheet%20-%208535451.pdf"]technical data sheet[/URL].

Gene.

tward · #5 (**permalink**) 12-05-2007, 01:58 PM

Thanks,I will reistall the washer and try it agin.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Whirlpool dishwasher	rcmleong	Dishwasher Repair	1	01-27-2010 03:42 AM
whirlpool dishwasher	wudz	Dishwasher Repair	0	09-03-2008 04:28 PM
whirlpool dishwasher	andyo	Dishwasher Repair	0	09-01-2008 11:30 AM
Whirlpool Dishwasher	Jon Ziarko	Dishwasher Repair	1	08-09-2007 04:54 PM

whirlpool dishwasher

General Talk

du1055f lite is blinking and will not start. I check heating ele. should read 10 to 30 ohms it shows