http://forum.appliancepartspros.com en Sat, 21 Nov 2009 18:59:30 GMT vBulletin 60 http://forum.appliancepartspros.com/cpstyles/app_icons/misc/rss.jpg http://forum.appliancepartspros.com http://forum.appliancepartspros.com/washer-repair/60065-motor-play-causing-trouble.html Sat, 21 Nov 2009 18:17:46 GMT Noisy washer during agitate/spin.
The belt has been replace. After replacement the noise was gone - but mid cycle it came back. The cover was open, I pulled to motor to make the belt tighter and the noise went away.
Seem like to motor is mounted to have play - I don't see how I can tighten it up.
There is a pin - I wonder if this is what governs the play. The pin doesn't look bad. How can I increase tension on the belt? ]]> Washer Repair justamom http://forum.appliancepartspros.com/washer-repair/60065-motor-play-causing-trouble.html http://forum.appliancepartspros.com/washer-repair/60061-couplings.html Sat, 21 Nov 2009 17:45:19 GMT How To Install Coupling From Motor To Tranny On An Roper. Thanks For Advice You Can Give Me. Chisselgw2 How To Install Coupling From Motor To Tranny
On An Roper. Thanks For Advice You Can Give Me.
Chisselgw2 ]]> Washer Repair chisselgw2 http://forum.appliancepartspros.com/washer-repair/60061-couplings.html http://forum.appliancepartspros.com/washer-repair/60050-loose-drum.html Sat, 21 Nov 2009 15:53:19 GMT Recently replaced the motor coupling on washer, which will be the second time in 4 years. The problem now is the drum agitates wildly when on spin cycle. I have looked for something being loose or sheared off, no luck. What could be the problem? Recently replaced the motor coupling on washer, which will be the second time in 4 years. The problem now is the drum agitates wildly when on spin cycle. I have looked for something being loose or sheared off, no luck. What could be the problem? ]]> Washer Repair blamon http://forum.appliancepartspros.com/washer-repair/60050-loose-drum.html http://forum.appliancepartspros.com/washer-repair/60029-start-button-flashes-will-not-start.html Sat, 21 Nov 2009 13:03:46 GMT I am having trouble starting the washer, the start button flashes but when I push the button , nothing happens. Any suggestions? I am having trouble starting the washer, the start button flashes but when I push the button , nothing happens. Any suggestions? ]]> Washer Repair LDJUSTDOIT http://forum.appliancepartspros.com/washer-repair/60029-start-button-flashes-will-not-start.html http://forum.appliancepartspros.com/washer-repair/60005-washing-machine-not-spinning.html Sat, 21 Nov 2009 08:38:31 GMT samsung washing machine was washing and rinsing and pumping out water but when in spin cycle was making all the right noises but not spinning therefore washing was really wet. This is a toploader machine. removed filter from bottom (at back of machine) didnt appear particularly dirty..however on replacing filter machine is making a really weird noise..impeller (sp) perhaps. any help would be great.. samsung washing machine was washing and rinsing and pumping out water but when in spin cycle was making all the right noises but not spinning therefore washing was really wet.
This is a toploader machine.
removed filter from bottom (at back of machine) didnt appear particularly dirty..however on replacing filter machine is making a really weird noise..impeller (sp) perhaps.
any help would be great.. ]]> Washer Repair jennyl11 http://forum.appliancepartspros.com/washer-repair/60005-washing-machine-not-spinning.html http://forum.appliancepartspros.com/washer-repair/59976-whirlpool-duet-washer-dont-work.html Sat, 21 Nov 2009 02:44:43 GMT my whirlpool duet washer won't work,reseted the control locked button,flashing light on the cycle button only and status lights button won't work or light when start button is push ]]> Washer Repair poginonie http://forum.appliancepartspros.com/washer-repair/59976-whirlpool-duet-washer-dont-work.html http://forum.appliancepartspros.com/washer-repair/59975-maytag-washer-fills-but-wont-start.html Sat, 21 Nov 2009 02:33:27 GMT While doing laundry, washer was set to pre soak, filled with water OK, but timer didnt advance and washer didnt start. Tried turning the dial to all different settings, and still wont start. I opened control panel, tested lid and check switch for continuity, they are fine, tested water level switch, tests fine as well. Check continuity of the main motor seems to be fine, although there are so many wires, wasnt sure which pair to test. I dont have continuity at the small timer motor though??? Any suggestions what to try next, wondered about trying to hot wire directly to the motor, but again wasnt sure which wires I would use, as it has 6 wires leading to it. Thanks in advance for any help. Neil While doing laundry, washer was set to pre soak, filled with water OK, but timer didnt advance and washer didnt start. Tried turning the dial to all different settings, and still wont start. I opened control panel, tested lid and check switch for continuity, they are fine, tested water level switch, tests fine as well. Check continuity of the main motor seems to be fine, although there are so many wires, wasnt sure which pair to test. I dont have continuity at the small timer motor though??? Any suggestions what to try next, wondered about trying to hot wire directly to the motor, but again wasnt sure which wires I would use, as it has 6 wires leading to it. Thanks in advance for any help.
Neil ]]> Washer Repair toyes http://forum.appliancepartspros.com/washer-repair/59975-maytag-washer-fills-but-wont-start.html http://forum.appliancepartspros.com/washer-repair/59963-will-not-spin.html Sat, 21 Nov 2009 00:04:10 GMT i can hear the pump,taking the water out.but it will not spin. i can hear the pump,taking the water out.but it will not spin. ]]> Washer Repair quincey http://forum.appliancepartspros.com/washer-repair/59963-will-not-spin.html http://forum.appliancepartspros.com/washer-repair/59960-how-do-i-balance-my-washer.html Fri, 20 Nov 2009 23:25:56 GMT Hi im just wondering how in the world u balance a washer machine. it is making banging noises when its on the spin cycle. Hi im just wondering how in the world u balance a washer machine. it is making banging noises when its on the spin cycle. ]]> Washer Repair jaimiecapalbo http://forum.appliancepartspros.com/washer-repair/59960-how-do-i-balance-my-washer.html http://forum.appliancepartspros.com/washer-repair/59958-maytag-washer-replacement-part-placement.html Fri, 20 Nov 2009 23:03:24 GMT Hi, I am replacing a motor in my maytag washer. There is a spring - it looks more like a clip, that attaches to the motor and to something else - whether it is the base or what I can't remember. Does anyone know where this particular spring fits??? The part number for the spring is AP4027842 and the parts diagram listing number is #5 of the motor diagram.:confused: Help???? ]]> Washer Repair Cathy V http://forum.appliancepartspros.com/washer-repair/59958-maytag-washer-replacement-part-placement.html http://forum.appliancepartspros.com/washer-repair/59944-transmission-troubles.html Fri, 20 Nov 2009 20:45:41 GMT I have a loud sound coming from the transmission when the machine should agitate. With the machine tiled back - the transmission wheel will spin in one direciton. Should it be able to be moved in both directions? I have a loud sound coming from the transmission when the machine should agitate.
With the machine tiled back - the transmission wheel will spin in one direciton. Should it be able to be moved in both directions? ]]> Washer Repair justamom http://forum.appliancepartspros.com/washer-repair/59944-transmission-troubles.html http://forum.appliancepartspros.com/washer-repair/59943-whirlpool-cabrio-washer-drum-noise.html Fri, 20 Nov 2009 20:36:52 GMT Just started a month ago, when the drum is agitating back and forth it makes a grinding noise. Also, when the system is idle no clothes in it, you can manually move the drum back and forth and hear the same noise. The unit performs fine, but the noise is starting to get worse. Is this a bearing?? thanks Greg Just started a month ago, when the drum is agitating back and forth it makes a grinding noise. Also, when the system is idle no clothes in it, you can manually move the drum back and forth and hear the same noise. The unit performs fine, but the noise is starting to get worse.
Is this a bearing?? thanks
Greg ]]> Washer Repair gpat http://forum.appliancepartspros.com/washer-repair/59943-whirlpool-cabrio-washer-drum-noise.html http://forum.appliancepartspros.com/washer-repair/59936-out-balance.html Fri, 20 Nov 2009 19:01:41 GMT The centering spring is broken and I'm not sure where it is supposed to be hooked. ]]> Washer Repair kencod http://forum.appliancepartspros.com/washer-repair/59936-out-balance.html http://forum.appliancepartspros.com/washer-repair/59928-maytag-support-spring.html Fri, 20 Nov 2009 17:47:35 GMT purchased a support spring but cant find where to hook it to. it must go on the front sence there are 2 shocks in the rear.Where does itgo ? purchased a support spring but cant find where to hook it to. it must go on the front sence there are 2 shocks in the rear.Where does itgo ? ]]> Washer Repair louism http://forum.appliancepartspros.com/washer-repair/59928-maytag-support-spring.html http://forum.appliancepartspros.com/washer-repair/59912-washer-fills-rinse-cycle-but-drains-simultaneously.html Fri, 20 Nov 2009 15:21:51 GMT my whirlpool washer does fine till the rinse starts filling. then it fills and drains at the same time. by rearranging things in the washer or jiggling the agitator, i can get it to finally fill up. but it is difficult to do. everything else works fine. my whirlpool washer does fine till the rinse starts filling. then it fills and drains at the same time. by rearranging things in the washer or jiggling the agitator, i can get it to finally fill up. but it is difficult to do. everything else works fine. ]]> Washer Repair ranjangretchen@gmail.com http://forum.appliancepartspros.com/washer-repair/59912-washer-fills-rinse-cycle-but-drains-simultaneously.html