http://forum.appliancepartspros.com Appliance repair forum from AppliancePartsPros.com. Appliance repair help questions answered by the Pros, free service. en Fri, 20 Nov 2009 21:24:35 GMT vBulletin 60 http://forum.appliancepartspros.com/cpstyles/app_icons/misc/rss.jpg http://forum.appliancepartspros.com http://forum.appliancepartspros.com/dishwasher-repair/59949-leaky-vent.html Fri, 20 Nov 2009 21:24:30 GMT My dishwasher is leaking at the gasket for the vent. I replaced the gasket and it still leaks. Could it be the vent assembly? Everything looks clean and good. My dishwasher is leaking at the gasket for the vent. I replaced the gasket and it still leaks. Could it be the vent assembly? Everything looks clean and good. ]]> Dishwasher Repair jameswalters http://forum.appliancepartspros.com/dishwasher-repair/59949-leaky-vent.html http://forum.appliancepartspros.com/dryer-repair/59948-whirpool-gas-dryer-intermitent-heat.html Fri, 20 Nov 2009 21:23:24 GMT Dryer is sometimes hot and sometimes not. I changed the ignitor for the flame. I know there is a few sensors. Would like to know which one is likely bad before i change all of them. thanks Dryer is sometimes hot and sometimes not. I changed the ignitor for the flame. I know there is a few sensors. Would like to know which one is likely bad before i change all of them.
thanks ]]> Dryer Repair jnk435 http://forum.appliancepartspros.com/dryer-repair/59948-whirpool-gas-dryer-intermitent-heat.html http://forum.appliancepartspros.com/refrigerator-freezer-repair/59946-martin-s.html Fri, 20 Nov 2009 21:08:48 GMT There is no water flow from the door dispenser. The ice maker works fine. Is this a valve problem? There is no water flow from the door dispenser. The ice maker works fine. Is this a valve problem? ]]> Martin S http://forum.appliancepartspros.com/refrigerator-freezer-repair/59946-martin-s.html http://forum.appliancepartspros.com/dishwasher-repair/59945-maytag-dishwasher-control-panel.html Fri, 20 Nov 2009 20:57:26 GMT Because I had to replace the control panel for the second time in a little over 5 years, Maytag agreed to pay for the part as long as I paid for the labor. Does $124.00 sound like a reasonable charge for labor to fix this part? KG Because I had to replace the control panel for the second time in a little over 5 years, Maytag agreed to pay for the part as long as I paid for the labor. Does $124.00 sound like a reasonable charge for labor to fix this part? KG ]]> Dishwasher Repair kbgolliff http://forum.appliancepartspros.com/dishwasher-repair/59945-maytag-dishwasher-control-panel.html http://forum.appliancepartspros.com/washer-repair/59944-transmission-troubles.html Fri, 20 Nov 2009 20:45:41 GMT I have a loud sound coming from the transmission when the machine should agitate. With the machine tiled back - the transmission wheel will spin in one direciton. Should it be able to be moved in both directions? I have a loud sound coming from the transmission when the machine should agitate.
With the machine tiled back - the transmission wheel will spin in one direciton. Should it be able to be moved in both directions? ]]> Washer Repair justamom http://forum.appliancepartspros.com/washer-repair/59944-transmission-troubles.html http://forum.appliancepartspros.com/washer-repair/59943-whirlpool-cabrio-washer-drum-noise.html Fri, 20 Nov 2009 20:36:52 GMT Just started a month ago, when the drum is agitating back and forth it makes a grinding noise. Also, when the system is idle no clothes in it, you can manually move the drum back and forth and hear the same noise. The unit performs fine, but the noise is starting to get worse. Is this a bearing?? thanks Greg Just started a month ago, when the drum is agitating back and forth it makes a grinding noise. Also, when the system is idle no clothes in it, you can manually move the drum back and forth and hear the same noise. The unit performs fine, but the noise is starting to get worse.
Is this a bearing?? thanks
Greg ]]> Washer Repair gpat http://forum.appliancepartspros.com/washer-repair/59943-whirlpool-cabrio-washer-drum-noise.html http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/59941-ge-gas-cooktop-igniter-keeps-clicking.html Fri, 20 Nov 2009 20:18:19 GMT Can someone help me solve this problem? After years of flawless service, one day 2 of the 5 burners would ignite, but the igniter would keep clicking even after the burner was lit. When I took the cooktop apart, there was a lot of corrosion between the brass venturi tubes and the gas jet holder. I replaced all 5 venturi tubes, and cleaned the threads on the gas jet holders with a wire brush. Didn't solve it. Checked all the igniter wires - replaced the shrink insulatgion on one connector that was cracked. No change. Replaced all the burner bases and igniters. Now the only time the igniters stop clicking is when all 5 burners are lit. Replaced the igniter module; no change. All 5 burners have good spark at the igniters, but it just won't stop clicking!

Does anyone know how the igniters know when the flame is lit? ]]> Oven Repair (including Ranges and Cooktops) Craig-o http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/59941-ge-gas-cooktop-igniter-keeps-clicking.html http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/59940-oven-goes-off.html Fri, 20 Nov 2009 19:38:45 GMT Kenmore 30" self-cleaning free=standing range (electric)
Model number - one of the following:
911-93561
911-93565
911-93568

Problem:

after you turn on the oven and it reaches the temprature that was set a clicking sound comes from the control panel and the oven goes off...if you twist the oven contro knob back and forth a bit and reset the temp the oven will come to temp and if I don't hear the clicking soud the oven will stay on for a few minutes then the clicking begines again and the oven goes...if I repeat the twisting of the control knob and resetting the tem proceedure the oven will com on again until the clicking starts again...

also: the broiler is not working...related to above ????

thank you for your help...Jim ]]> Oven Repair (including Ranges and Cooktops) jbrockett http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/59940-oven-goes-off.html http://forum.appliancepartspros.com/dishwasher-repair/59937-bosch-sgi57m05gb-17-display-blank-stuck-cold-rinse.html Fri, 20 Nov 2009 19:20:02 GMT Hi all,

Yesterday the display failed on our Bosch SGI57M05GB/17. Now nothing displays and it's stuck on the cold rinse setting.

Has anyone got any idea what might have failed? Is it likely to be the control module?

Thanks in advance for any help,

Leggie ]]> Dishwasher Repair Leggie http://forum.appliancepartspros.com/dishwasher-repair/59937-bosch-sgi57m05gb-17-display-blank-stuck-cold-rinse.html http://forum.appliancepartspros.com/washer-repair/59936-out-balance.html Fri, 20 Nov 2009 19:01:41 GMT The centering spring is broken and I'm not sure where it is supposed to be hooked. ]]> Washer Repair kencod http://forum.appliancepartspros.com/washer-repair/59936-out-balance.html http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/59935-burner-stuck.html Fri, 20 Nov 2009 18:59:32 GMT Hello,
Please help me with this flat cooktop problem. The large burner (bottom right) is stuck on high. Knob indicates it is off. 'Element on' light is off. But the burner stays on high. Heard a soft zzzzt noise, then the burner was stuck on. Had to turn it off at the breaker. I can't figure how to get the top off to look underneath and can't find a manual online. Please Help! I have a cheesecake order to deliver and Thanksgiving is next week!
Thanks!
CeeJay ]]> Oven Repair (including Ranges and Cooktops) CeeJay http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/59935-burner-stuck.html http://forum.appliancepartspros.com/refrigerator-freezer-repair/59934-instructions-defrost-heater-installation.html Fri, 20 Nov 2009 18:49:05 GMT We ordered a replacement defrost heater assembly (WR51X10031) for our refrigerator. The instructions that came with the part were for replacing a dual element defrost heater with a single element heater. We need the instructions for replacing a single element heater with a single element heater. I contacted a live chat representative, and they said that I needed to post the question on the forum to get the correct instructions. We ordered a replacement defrost heater assembly (WR51X10031) for our refrigerator. The instructions that came with the part were for replacing a dual element defrost heater with a single element heater. We need the instructions for replacing a single element heater with a single element heater. I contacted a live chat representative, and they said that I needed to post the question on the forum to get the correct instructions. ]]> mcindmj http://forum.appliancepartspros.com/refrigerator-freezer-repair/59934-instructions-defrost-heater-installation.html http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/59932-hotpoint-oven-thermostat-replacement.html Fri, 20 Nov 2009 18:28:00 GMT Need to replace Thermostat but can't get the capillary tube out of the oven. Plate that holds the burners blocks removal of tube because of length of tube. ]]> Oven Repair (including Ranges and Cooktops) mcqueary http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/59932-hotpoint-oven-thermostat-replacement.html http://forum.appliancepartspros.com/refrigerator-freezer-repair/59931-icemaker-not-working.html Fri, 20 Nov 2009 18:01:58 GMT my water despenser on ref works, but icemaker is not filling up. I check the water line to make sure and its getting water but tray won't fill ]]> alb014 http://forum.appliancepartspros.com/refrigerator-freezer-repair/59931-icemaker-not-working.html http://forum.appliancepartspros.com/washer-repair/59928-maytag-support-spring.html Fri, 20 Nov 2009 17:47:35 GMT purchased a support spring but cant find where to hook it to. it must go on the front sence there are 2 shocks in the rear.Where does itgo ? purchased a support spring but cant find where to hook it to. it must go on the front sence there are 2 shocks in the rear.Where does itgo ? ]]> Washer Repair louism http://forum.appliancepartspros.com/washer-repair/59928-maytag-support-spring.html