Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
jzeni  
#1 Posted : Tuesday, March 2, 2010 5:25:27 PM(UTC)
Quote
jzeni

Rank: Member

Groups: Registered
Joined: 3/2/2010(UTC)
Posts: 3

i have a problem with the blower not running. it will rock back and forth or possibly make 1 revolution for several cycles in a row. occasionally it will start and the gas valve will open. it did then shut down in about 10 seconds but i had the door off so i assume it was from the over limit switch in the tube. i believe the motor to be ok since it can run. i also do not get an error code when i push my cycles and help buttons. i cant seem to locate a repair manual so i'd appreciate any troubleshooting tips.
thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sidfink43  
#2 Posted : Saturday, March 6, 2010 5:08:22 PM(UTC)
Quote
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

Here is a repair manual from another site

http://www.affordableappliance....der/GE_Harmony_Dryer.pdf
jzeni  
#3 Posted : Saturday, March 13, 2010 6:13:50 PM(UTC)
Quote
jzeni

Rank: Member

Groups: Registered
Joined: 3/2/2010(UTC)
Posts: 3

Originally Posted by: sidfink43 Go to Quoted Post
Here is a repair manual from another site

http://www.affordableappliance....der/GE_Harmony_Dryer.pdf

thank you sidfink43. i downloaded the manual and will be able to use it to diagnose. you see, when i put the machine back together it worked normally as it did last time i had the same problem. now though il have a place to start.
jzeni  
#4 Posted : Thursday, March 18, 2010 10:05:26 AM(UTC)
Quote
jzeni

Rank: Member

Groups: Registered
Joined: 3/2/2010(UTC)
Posts: 3

Originally Posted by: jzeni Go to Quoted Post
thank you sidfink43. i downloaded the manual and will be able to use it to diagnose. you see, when i put the machine back together it worked normally as it did last time i had the same problem. now though il have a place to start.

well the dryer is out again but this time my error code is the "blower is not getting up to speed". this leaves me with 2 possible problems. replace the blower motor or the inverter. the motor winding check out and there is no way that i see to check the inverter. any ideas?
sidfink43  
#5 Posted : Thursday, March 18, 2010 11:28:53 AM(UTC)
Quote
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

Can't really say except the electronics are usually the culprit.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.