[john77oh]

Model 97591240
sensors mounted on the flame chamber and the igniter show continuity but get no ignition/glow from igniter.
All vents are clear. Gas is on and to the dryer. Power is on, drum turns and timer cycles properly. suggestions?

[Qtip]

check the black valve coils for continuity

[john77oh]

Originally Posted by Qtip

check the black valve coils for continuity

valve coils check ok, 500 to 1000 ohms

[Simon / APP Team]

Hi, John.

Most likely the problem is bad thermal fuse.
It's located on the blower housing.
With the dryer unplugged get the toe panel off , take one wire off the fuse and check for continuity. If it's open - replace the fuse.

The thermal fuse Part number: AP3133489

Thank you. Post the results.