Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
unclemike1  
#1 Posted : Sunday, February 7, 2010 2:13:05 PM(UTC)
Quote
unclemike1

Rank: Member

Groups: Registered
Joined: 2/7/2010(UTC)
Posts: 1

motor turns on but the drumm will not turn, heats up ok how do I check the belt? please help.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sidfink43  
#2 Posted : Wednesday, February 10, 2010 6:25:23 AM(UTC)
Quote
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

Insert a screw driver or putty knife in the gap between the top and front near the edges and pry up on the top. It will flip back. You can now see if there is a belt.

To replace the belt take off the access panel in the back and the front panel. Use the belt diagrams in the Stick above to see how it goes.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.