[sully]

My dryer was running for three hours blowing cold air. I figured out that my thermo fuse broke- I replaced it. It heat up again but seems very hot. I put a load in for 30 min. But it keeps on going and seems too hot. The vent is clear, Could it be the thermal high limit thermostat control? help?
Thanks.

[fixtec90]

Did you clean your vent when you changed the t-fuse especially the point where it exits the house? If you're positive it's clear one of the t-stats is bad. The cycling t-stat is the normal culprit, but I'm not sure if your gas dryer has that type of t-stat. If not I'd suspect the hi-limit, but would need a wiring diagram before I'd put any money on the diagnosis.