|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Seperating motor from blower |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
12-27-2009, 05:17 AM
|
|||
|
|||
Seperating motor from blower
Model Number: TEDL640BW2 Brand: Estate Age: 5 - 10 years
Hi New to the site and could use some expertise on my dryer.I think that the motor is shot and cannot get the blower seperated from the motor,is it threaded in?Do not find any set screws or nothing holding it Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
12-27-2009, 10:58 AM
|
|||
|
|||
|
Figured this out,backwards thread,DUH!!!!! Also motor was not shot.I could get the shaft to spin but had to use a pliers to do so.Cleaned it out with copressed air real good and put a little lube around the bearings and started working it,pretty soon could move it with my fingers.Reinstalled works fine.
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Blower Motor not working | mooney99 | Heating, Ventilation, and Air Conditioning (HVAC) | 3 | 02-24-2010 03:48 PM |
| Blower Motor | RWKEND | Oven Repair (including Ranges and Cooktops) | 0 | 02-18-2010 08:52 AM |
| Blower Motor | neboshone | Heating, Ventilation, and Air Conditioning (HVAC) | 1 | 10-03-2009 05:52 AM |
| Blower motor overheats | db55047 | Heating, Ventilation, and Air Conditioning (HVAC) | 10 | 12-06-2008 04:39 AM |
| Blower motor is... blown | Alcaeus | Heating, Ventilation, and Air Conditioning (HVAC) | 3 | 11-02-2008 05:57 AM |
Linear Mode
