Discuss

Whirlpool Duet Sport Dryer

 in

Dryer Repair

. "

My dryer will not run. I get an F 01 code. I found reports that the circuit board might be

..."
 
 
Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Appliance Repair Help > Dryer Repair » Whirlpool Duet Sport Dryer

  By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use.
 
LinkBack Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 04-06-2018, 08:25 AM
Junior Member
 
Join Date: Apr 2018
Posts: 4
JohnCheyne is on a distinguished road
Default Whirlpool Duet Sport Dryer
Model Number: W10151581A   Brand: Whirlpool   Age: 5 - 10 years   

Appliance Parts from AppliancePartPros.com


My dryer will not run. I get an F 01 code. I found reports that the circuit board might be fried. I checked it and it appeared too be good. I checked the thermal fuse and found it was defective. I replaced it and the dryer worked for 1 load and now the thermal fuse is blown again. Venting is good. Any thoughts? Perhaps I should have replaced both the thermal fuse and thermistor together?


Related Models
Whirlpool w10304543a REFRIGERATOR
Jenn-Air W104 WALLOVEN- S/C ELE
Jenn-Air W105 WALLOVEN- S/C ELE
Jenn-Air W105-C WALLOVEN- S/C ELE
Jenn-Air W106B WALLOVEN- S/C ELE
Jenn-Air W106B-C WALLOVEN- S/C ELE
Jenn-Air W106W WALLOVEN- S/C ELE
Jenn-Air W106W-C WALLOVEN- S/C ELE
Magic Chef W10AA1 WASHER-TOP LOADING
Magic Chef W10AN1 WASHER-TOP LOADING
Jenn-Air W110 WALLOVEN- S/C ELE
Jenn-Air W116 WALLOVEN- S/C ELE
Jenn-Air W120 WALLOVEN- S/C ELE
Jenn-Air W120-C WALLOVEN- S/C ELE
Jenn-Air W121 WALLOVEN- S/C ELE
Jenn-Air W121-C WALLOVEN- S/C ELE
Jenn-Air W121-E WALLOVEN- S/C ELE
Jenn-Air W122 WALLOVEN- S/C ELE
Jenn-Air W122-C WALLOVEN- S/C ELE
Jenn-Air W123 WALLOVEN- S/C ELE
Jenn-Air W123-C WALLOVEN- S/C ELE
Jenn-Air W130 WALLOVEN- S/C ELE
Jenn-Air W130-C WALLOVEN- S/C ELE
Jenn-Air W130W WALLOVEN- S/C ELE
Jenn-Air W130W-C WALLOVEN- S/C ELE
Jenn-Air W131B WALLOVEN- S/C ELE
Jenn-Air W131B-C WALLOVEN- S/C ELE
Jenn-Air W131W WALLOVEN- S/C ELE
Jenn-Air W131W-C WALLOVEN- S/C ELE
Jenn-Air W132B WALLOVEN- S/C ELE
Jenn-Air W132W WALLOVEN- S/C ELE
Jenn-Air W136 WALLOVEN- S/C ELE
Jenn-Air W136-C WALLOVEN- S/C ELE
Jenn-Air W136W WALLOVEN- S/C ELE
Jenn-Air W136W-C WALLOVEN- S/C ELE
Jenn-Air W140 WALLOVEN- S/C ELE
Jenn-Air W141 WALLOVEN- S/C ELE
Jenn-Air W141-C WALLOVEN- S/C ELE
Jenn-Air W142 WALLOVEN- S/C ELE
Jenn-Air W142-C WALLOVEN- S/C ELE
Jenn-Air W146 WALLOVEN- S/C ELE
Jenn-Air W146-C WALLOVEN- S/C ELE
Magic Chef W14EA1 WASHER-TOP LOADING
Magic Chef W14EN1 WASHER-TOP LOADING
Magic Chef W14HA1 WASHER-TOP LOADING
Magic Chef W14HN1 WASHER-TOP LOADING
Magic Chef W14HY1 WASHER-TOP LOADING
Magic Chef W14JA1 WASHER-TOP LOADING
Magic Chef W14JN1 WASHER-TOP LOADING
Magic Chef W14JY1 WASHER-TOP LOADING
Jenn-Air W156 Walloven - S/c Ele
Jenn-Air W156-C WALLOVEN- S/C ELE
Jenn-Air W156B WALLOVEN- S/C ELE
Jenn-Air W156B-C WALLOVEN- S/C ELE
Jenn-Air W156W WALLOVEN- S/C ELE
Jenn-Air W156W-C WALLOVEN- S/C ELE
Jenn-Air W181 WALLOVEN- S/C ELE
Jenn-Air W188 WALLOVEN- S/C ELE
Jenn-Air W188-C WALLOVEN- S/C ELE
Jenn-Air W188W WALLOVEN- S/C ELE
Jenn-Air W188W-C WALLOVEN- S/C ELE
Amana W18C3HES ROOM AIR CONDITIONER
Magic Chef W18DA2 WASHER-TOP LOADING
Magic Chef W18DN2 WASHER-TOP LOADING
Magic Chef W18DY2 WASHER-TOP LOADING
Magic Chef W18EA1 WASHER-TOP LOADING
Magic Chef W18EA2 WASHER-TOP LOADING
Magic Chef W18EN1 WASHER-TOP LOADING
Magic Chef W18EN2 WASHER-TOP LOADING
Magic Chef W18EY1 WASHER-TOP LOADING
Magic Chef W18EY2 WASHER-TOP LOADING
Magic Chef W18FA1 WASHER-TOP LOADING
Magic Chef W18FA1C WASHER-TOP LOADING
Magic Chef W18FA2 WASHER-TOP LOADING
Magic Chef W18FN1 WASHER-TOP LOADING
Magic Chef W18FN1C WASHER-TOP LOADING
Magic Chef W18FN2 WASHER-TOP LOADING
Magic Chef W18FY1 WASHER-TOP LOADING
Magic Chef W18FY1C WASHER-TOP LOADING
Magic Chef W18FY2 WASHER-TOP LOADING
Magic Chef W18GA1 WASHER-TOP LOADING
Magic Chef W18GN1 WASHER-TOP LOADING
Magic Chef W18GY1 WASHER-TOP LOADING
Magic Chef W18HA1 WASHER-TOP LOADING
Magic Chef W18HN1 WASHER-TOP LOADING
Magic Chef W18HY1 WASHER-TOP LOADING
Magic Chef W18JA1 WASHER-TOP LOADING
Magic Chef W18JN1 WASHER-TOP LOADING
Jenn-Air W198 WALLOVEN- S/C ELE
Jenn-Air W198-C WALLOVEN- S/C ELE
Jenn-Air W198W WALLOVEN- S/C ELE
Jenn-Air W198W-C WALLOVEN- S/C ELE
Whirlpool W1TXEMFWB00 REFRIGERATOR
Whirlpool W1TXEMFWB01 REFRIGERATOR
Whirlpool W1TXEMFWB02 REFRIGERATOR
Whirlpool W1TXEMFWB04 REFRIGERATOR
Whirlpool W1TXEMFWQ00 REFRIGERATOR
Whirlpool W1TXEMFWQ01 REFRIGERATOR
Whirlpool W1TXEMFWQ02 REFRIGERATOR
Whirlpool W1TXEMFWQ04 REFRIGERATOR
Whirlpool W1TXEMFWS00 REFRIGERATOR
Whirlpool W1TXEMFWS01 REFRIGERATOR
Whirlpool W1TXEMFWS02 REFRIGERATOR
Whirlpool W1TXEMFWS04 REFRIGERATOR
Whirlpool W1TXEMFWT00 REFRIGERATOR
Whirlpool W1TXEMFWT01 REFRIGERATOR
Whirlpool W1TXEMMWB00 REFRIGERATOR
Whirlpool W1TXEMMWB02 REFRIGERATOR
Whirlpool W1TXEMMWB03 REFRIGERATOR
Whirlpool W1TXEMMWB04 REFRIGERATOR
Whirlpool W1TXEMMWQ00 REFRIGERATOR
Whirlpool W1TXEMMWQ02 REFRIGERATOR
Whirlpool W1TXEMMWQ03 REFRIGERATOR
Whirlpool W1TXEMMWQ04 REFRIGERATOR
Whirlpool W1TXEMMWS00 REFRIGERATOR
Whirlpool W1TXEMMWS01 REFRIGERATOR
Whirlpool W1TXEMMWS02 REFRIGERATOR
Whirlpool W1TXEMMWS03 REFRIGERATOR
Whirlpool W1TXEMMWS04 REFRIGERATOR
Whirlpool W1TXEMMWT00 REFRIGERATOR
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
  #2 (permalink)  
Old 04-06-2018, 09:30 AM
Joe / APP Team's Avatar
Senior Expert
 
Join Date: Jul 2010
Posts: 5,222
Joe / APP Team is on a distinguished road
Default

Quote:
Originally Posted by JohnCheyne View Post
My dryer will not run. I get an F 01 code. I found reports that the circuit board might be fried. I checked it and it appeared too be good. I checked the thermal fuse and found it was defective. I replaced it and the dryer worked for 1 load and now the thermal fuse is blown again. Venting is good. Any thoughts? Perhaps I should have replaced both the thermal fuse and thermistor together?
John, Check and make sure the duct under the lint filter and the blower housing and wheel are not blocked with lint or obstructions. Check the vent hood to make sure it's not blocked or damaged, etc. The thermal fuse is rated at 200 dgrs.F. and will "open" if there is an air flow problem. It's not "mandatory" to replace the thermistor when the thermal fuse fails, but it's a real good idea if you do. Of course, recheck the basics, lint filter clean, overloaded, etc.
__________________
Thanks for allowing AppliancePartsPros.com to assist you,

Joe M. APP TEAM



Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.
  #3 (permalink)  
Old 04-06-2018, 09:43 AM
Junior Member
 
Join Date: Apr 2018
Posts: 4
JohnCheyne is on a distinguished road
Default

Everything appears to be fine as far as obstructions. After I replaced the thermal fuse, I went outside and the airflow was excellent coming out of the vent, but as we know the new thermal fuse blew again. The dryer did seem hotter than normal though.
Is there anything that would cause the thermal fuse to blow besides vent obstructions?

Last edited by JohnCheyne : 04-06-2018 at 10:39 AM. Reason: adding question
  #4 (permalink)  
Old 04-06-2018, 09:49 AM
Joe / APP Team's Avatar
Senior Expert
 
Join Date: Jul 2010
Posts: 5,222
Joe / APP Team is on a distinguished road
Default

Quote:
Originally Posted by JohnCheyne View Post
Everything appears to be fine as far as obstructions. After I replaced the thermal fuse, I went outside and the airflow was excellent coming out of the vent, but as we know the new thermal fuse blew again. The dryer did seem hotter than normal though.
John, check and make sure the heater element and wiring aren't shorted to ground, and/or the gas valve isn't "sticking" open. Then replace the thermistor, as a possible issue. A proper model number would be helpful. Thanks,
__________________
Thanks for allowing AppliancePartsPros.com to assist you,

Joe M. APP TEAM



Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.
  #5 (permalink)  
Old 04-06-2018, 10:46 AM
Junior Member
 
Join Date: Apr 2018
Posts: 4
JohnCheyne is on a distinguished road
Default

Correct Model number is YWED8300SW2
Also, How do I check the thermistor. I have a reading of 12.8 on my meter when set at the 200k setting. Is that a good reading or what should it be?

Last edited by JohnCheyne : 04-06-2018 at 10:51 AM. Reason: add question
  #6 (permalink)  
Old 04-06-2018, 11:01 AM
Joe / APP Team's Avatar
Senior Expert
 
Join Date: Jul 2010
Posts: 5,222
Joe / APP Team is on a distinguished road
Default

Quote:
Originally Posted by JohnCheyne View Post
Correct Model number is YWED8300SW2
Also, How do I check the thermistor. I have a reading of 12.8 on my meter when set at the 200k setting. Is that a good reading or what should it be?
John, That's a tad bit high, should be 10K ohms at room temperature(77 dgrs.F.)see the attached tech sheet for testing and accessing the components needing to be checked.
Attached Images
File Type: pdf Tech Sheet - 8578834 - Rev A.pdf (702.9 KB, 2 views)
__________________
Thanks for allowing AppliancePartsPros.com to assist you,

Joe M. APP TEAM



Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.
  #7 (permalink)  
Old 04-06-2018, 11:07 AM
Junior Member
 
Join Date: Apr 2018
Posts: 4
JohnCheyne is on a distinguished road
Default

What is high? I never really understood how to use this ohm reader. I have the thermistor out and it is at room temp, reads 12.8 at 200k or 12.84 at 20k. the other settings do nothing.
  #8 (permalink)  
Old 04-06-2018, 12:21 PM
Joe / APP Team's Avatar
Senior Expert
 
Join Date: Jul 2010
Posts: 5,222
Joe / APP Team is on a distinguished road
Default

Quote:
Originally Posted by JohnCheyne View Post
What is high? I never really understood how to use this ohm reader. I have the thermistor out and it is at room temp, reads 12.8 at 200k or 12.84 at 20k. the other settings do nothing.
John, Depending on the meter, if you have a 10k setting(or in your case a 20k setting) the 1k or rx1 setting is too low to read the proper resistance and you won't register a reading. On the higher settings 100k or 200k, you slide the decimal point over one digit.
We would expect to see 10-11K ohms resistance on the thermistor at room temp, but (70-77 F.) = 11.513.5 k ohms. is the recommended resistance range. A tad bit high, but within the resistance range, and should not affect the heat operation of the dryer, or cause the thermal fuse to open. But you may want to change it anyway.
__________________
Thanks for allowing AppliancePartsPros.com to assist you,

Joe M. APP TEAM



Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
whirlpool sport duet 27 in dryer retiredarmysarge Dryer Repair 3 02-24-2017 06:59 AM
Whirlpool Duet Sport Dryer (Electric) carjeff7 Dryer Repair 0 03-20-2015 10:19 AM
Whirlpool Duet Sport Dryer F-01 Manual's Solution Doesn't Work LisaH73 Dryer Repair 2 12-18-2011 11:29 PM
Whirlpool Duet Sport Dryer....latch issue stacyt Dryer Repair 1 12-18-2010 05:22 PM
Whirlpool Duet Sport Dryer wont start Jstout Dryer Repair 4 08-20-2008 01:11 PM



All times are GMT -7. The time now is 11:36 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17