Discuss

Harmony Platinum dpgt750ec1pl blower motor misaligned?

 in

Dryer Repair

. "

Here is a pic looking inside the metal vent tube, you can see a plastic connection that appears to be

..."
 
 
Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Appliance Repair Help > Dryer Repair » Harmony Platinum dpgt750ec1pl blower motor misaligned?

Post New Thread  Reply By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use.
 
LinkBack Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 03-16-2018, 05:07 PM
Junior Member
 
Join Date: Mar 2018
Posts: 3
Firerebel is on a distinguished road
Default Harmony Platinum dpgt750ec1pl blower motor misaligned?
Brand: GE   Age: 5 - 10 years   

Appliance Parts from AppliancePartPros.com


Here is a pic looking inside the metal vent tube, you can see a plastic connection that appears to be disconnected. I checked because of a minor burning smell and if it's disconnected like I think then I imagine the dryer is full of lint.

I also posted a pic of what the inside of the dryer should look like that i found. Mine is electric though.

If you guys agree, how difficult would it be to open this thing up, realign that blower and fasten it down? Everything else works ok on the dryer, it just doesn't collect much lint and dries a little slow. Oh and the blower still blows strong

https://imgur.com/gallery/7brYq


Last edited by Firerebel : 03-16-2018 at 05:14 PM.
Reply With Quote
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
  #2 (permalink)  
Old 03-16-2018, 10:52 PM
Junior Member
 
Join Date: Mar 2018
Posts: 3
Firerebel is on a distinguished road
Default

I fixed it. Go through standard steps of taking off front door panel then saw that metal sleeve vent was fallen off. Must have been years, took it outside and blew it out with a leaf blower, cleaned, realigned metal sleeve and pushed tight to seal, had to bend metal clip on back of dryer where aluminum floppy tube would attach, reassemble done
Reply With Quote
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
GE Profile Harmony Dryer - Intermittant Blower Motor? jniggli Dryer Repair 104 11-16-2016 03:39 AM
GE Profile Harmony DPGT750EC1PL not drying mflick3 Dryer Repair 14 05-22-2013 04:52 PM
GE Profile Harmony dryer, BLOWER MOTOR PAUL239 Dryer Repair 0 12-28-2010 06:15 PM
GE Profile Harmony dryer, BLOWER MOTOR PAUL239 Dryer Repair 0 12-28-2010 06:12 PM



All times are GMT -7. The time now is 12:24 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17