|Register | FAQ's | New Posts | Today's Posts | Extras|
Roper Electric Dryer - No heat in Automatic
Model Number: REX4634KQ1 Brand: Roper Age: More than 10 years
Im working on a Roper REX4634KQ1 dryer.
Its not getting heat in the automatic cycle.
I have replaced the heating element, high limit thermos, fuse and cycling thermo...
Took it from a vacant unit and since it was clean, I decided to 'rebuild' it.
Original complaint on it was the no heat issue in auto. I figured that, like all other complaints, it was the hi limits.
This one has me stumped.
The parts have been tested and are okay. I have swapped timers as well.
In some of the reading Ive done, it seems that there is a resistor on some models, ususally on the panel... not the case here, no resistor to be found.
Anyone familiar with these know if there is a resistor located in an obscure spot?
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Electric Roper Dryer Runs but No heat!!!!||ayjay1989||Dryer Repair||0||02-18-2012 11:58 AM|
|roper electric dryer runs but no heat||wiseguy157||Dryer Repair||0||01-25-2012 05:05 PM|
|roper electric dryer no heat||jboden||Dryer Repair||6||04-13-2009 01:51 PM|
|Roper Electric Dryer No Heat||samvonsee||Dryer Repair||0||03-10-2009 09:16 AM|
|roper electric dryer, runs, no heat||nathan1||Dryer Repair||1||03-07-2008 05:15 PM|