I took the timer out of the the dryer and did something stupid. I didn't take a picture of the wiring first. Now I want to put it back together and I got it all but 2 wires.

Let's skip the reason why I took the timer out and what I was hoping to accomplish, for the moment.

The timer is a Whirlpool AP2976128 (aka 3976581).

On the wiring diagram (photo of it below) folded up inside the top console, there is a picture of the timer and the wires are labeled by color. Mostly it's easy to figure out, especially because 3 wires are in a plastic clip on one side and 2 wires on the other (although the diagram claims there is a 3rd GREY OR TAN JUMPER in the other, there is not). There are a few wires that are not shown on the diagram. The extras on the left side were easy to tell where they go because of how the wires are bent from having been there so long.

It's 2 wires on the right side that are giving me fits. You can see them in the image, I drew red arrows pointing to them. There's a white and a beige wire in the plastic clip on that side; I'm not talking about those two. It is the white wire with a black stripe (top right arrow), and the violet wire (bottom right arrow) that are not in the diagram. I think white went on top and violet on the bottom but I'm not sure. I'm fairly certain beige (no arrow) was in the middle.