Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
EloiseZilla  
#1 Posted : Sunday, February 23, 2014 1:22:50 PM(UTC)
Quote
EloiseZilla

Rank: Member

Groups: Registered
Joined: 2/23/2014(UTC)
Posts: 3

My nearly new electric dryer is stopping halfway through the cycle and popping open the door like the clothes are done but they are damp. I have cleared all the vents and the fan of lint (there was very little) and was still having the issue. I tested both thermostats in the drum and they both work I have also tested the thermostat by the lint trap which also works. Both thermisters are showing 90ohms at room temp and decrease when heated. I have no idea what the problem is, any help would be greatly appreciated!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Tuesday, February 25, 2014 1:15:10 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts.
Parts for GE GFDN240EL1WW / - AppliancePartsPros.com

Could be that the door is not latching correctly/tight enough.
The clothes then pop the door open stopping the unit.

Check the door strike (item 3049 in section 02) and the door latch (item 327 in section 03).
THIS FORUM IS DEAD!!!!!!!
EloiseZilla  
#3 Posted : Wednesday, February 26, 2014 7:03:37 PM(UTC)
Quote
EloiseZilla

Rank: Member

Groups: Registered
Joined: 2/23/2014(UTC)
Posts: 3

Thanks for the reply, the door defenatly feels like it comes open easier than it should. I wonder if one of my kids was hanging on it. Also I ran the codes and got error code 11 dryer motor or centrafugal sensor error. Would that be causing the problem, the dryer does not over heat.
denman  
#4 Posted : Thursday, February 27, 2014 2:29:35 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
I do not have access to GHE tech data so I cannot say what that error actually means.

Run a cycle with no clothes in the unit to see if it runs OK.

If it runs OK then I would prop something against the door so it cannot open and run a cycle with clothes in it.
If that also runs OK then I would say that the latch parts need replacing.

If the female part of the latch is OK sometimes you can bend the male part out a bit (make it wider where the latch catches) with needle nose pliers.
THIS FORUM IS DEAD!!!!!!!
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
GE Dryer Stopping Mid Cycle (Dryer Repair)
by EloiseZilla 2/23/2014 1:22:09 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.