Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
New Topic Post Reply
New Timer
Options
Go to last post Go to first unread
Model: MDE7400AYW Brand: Maytag Age: 1 - 5 years
Previous Topic Next Topic
jwb188  
#1 Posted : Saturday, September 21, 2013 10:36:21 AM(UTC)
Quote
jwb188

Rank: Member

Groups: Registered
Joined: 9/21/2013(UTC)
Posts: 2
I just replaced the timer. The dryer comes on but the timer does not change positions.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
HumboldtRepairMan  
#2 Posted : Saturday, September 21, 2013 1:32:36 PM(UTC)
Quote
HumboldtRepairMan

Rank: Member

Groups: Registered
Joined: 7/16/2013(UTC)
Posts: 916
Check your voltage going to the machine has to be 240v and good connections and a good harness on a dedicated circuit just for the dryer and not with anything else.
Back to top
denman  
#3 Posted : Monday, September 23, 2013 2:44:31 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Does the timer not advance in both timed dry and auto modes?
THIS FORUM IS DEAD!!!!!!!
Back to top
jwb188  
#4 Posted : Wednesday, September 25, 2013 7:59:32 PM(UTC)
Quote
jwb188

Rank: Member

Groups: Registered
Joined: 9/21/2013(UTC)
Posts: 2
Voltage is good. Connections are fine. The company sent me a replacement timer, but it acts the same as the last one.

Timer does not advance in any mode. It stays where ever it is when I turn it on. If I set it for dry or timer the dryer gets hot. If I set it in the middle of cool down, it acts appropriately.
Back to top
denman  
#5 Posted : Thursday, September 26, 2013 4:05:11 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for Maytag MDE7400AYW Dryer - AppliancePartsPros.com

Odds are that the dryness board (item 13 in section 02) is bad.
It is what drives the timer motor.

Note that if you click on the part's picture/description a new page will oepn with more info about it.
THIS FORUM IS DEAD!!!!!!!
Back to top
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
New Timer doesn't time (Dryer Repair)
by jgil 6/13/2017 7:54:53 PM(UTC)
New Timer does not seem to advance (Refrigerator & Freezer Repair)
by VA_DIY 7/31/2015 10:06:14 AM(UTC)
Maytag Atlantis new timer not working (Dryer Repair)
by blewis123456 11/5/2014 8:26:45 AM(UTC)
New Timer Part Doesn't Work (Dryer Repair)
by tchart 8/10/2013 9:41:09 AM(UTC)
New timer will not advance (Washer Repair)
by meganbella 4/5/2013 7:02:18 AM(UTC)
Whirlpool dryer will not shut off after new timer replacement (Dryer Repair)
by grayfeathers 10/23/2012 4:23:08 PM(UTC)
New timer, lid switch bypassed. Need help with diagnosis (Washer Repair)
by tejuguasu 9/11/2012 6:13:52 PM(UTC)
WP Ultimate Care 2 washer problems...new timer didn't fix (Washer Repair)
by HunterTinsley 4/6/2012 6:11:49 PM(UTC)
new timer, many tests, still won't work (Dryer Repair)
by zenart 1/22/2012 7:05:24 AM(UTC)
black wire on new timer (Refrigerator & Freezer Repair)
by tjescalona 12/4/2011 7:16:04 AM(UTC)
Kinmore New Timer Old knob (Washer Repair)
by 1015eclipse 8/9/2011 7:11:33 PM(UTC)
put in new timer and still not going through cycles (Washer Repair)
by Indianriver 6/26/2011 3:58:40 PM(UTC)
New timer, still stcuk (Dryer Repair)
by mkitchin 12/31/2010 12:26:10 PM(UTC)
GE Dryer - new timer still does not count down (Dryer Repair)
by jmb322 12/29/2010 4:55:57 PM(UTC)
new pump and new timer (Washer Repair)
by mikey995102002@yahoo.com 3/29/2010 11:14:25 AM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET