Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
jsamp05  
#1 Posted : Sunday, August 11, 2013 12:11:50 PM(UTC)
Quote
jsamp05

Rank: Member

Groups: Registered
Joined: 8/11/2013(UTC)
Posts: 2

My Kenmore dryer is running too hot.... Even on air only it is running very hot. I would like to repair it if possible but I could use some help getting started.

Thanks in advance....
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
HumboldtRepairMan  
#2 Posted : Sunday, August 11, 2013 4:01:19 PM(UTC)
Quote
HumboldtRepairMan

Rank: Member

Groups: Registered
Joined: 7/16/2013(UTC)
Posts: 916

Here's a video to help you............test all your thermostats and cut offs, element with multimeter throughout unit
Whirlpool 3387747 Dryer Heating Element - AppliancePartsPros.com
denman  
#3 Posted : Monday, August 12, 2013 4:02:05 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
The first thing I would check is the heating coil.

Unplug the unit.
Remove both wires from the heating coil.
Check across the heating coil. Should be 8 to 12 ohms.
Then check from each coil connector to the heater case. Both should be infinite ohms.
If not the heater is grounded and needs replacing.
Often you can see where it is broken or grounded.

Next would be to check the heater relay.
You could check across the relay contacts. they should be open.
If zero ohms (closed) the relay contacts are wellded together and it needs to be replaced.

Another way to do this is to unplug the unit and swap the motor and heater relays.
I believe they are the same but you should confirm this before swapping.
If the unit now starts as soon as the door is closed and regulates the heat then the relay is bad.
THIS FORUM IS DEAD!!!!!!!
jsamp05  
#4 Posted : Monday, August 12, 2013 4:49:02 AM(UTC)
Quote
jsamp05

Rank: Member

Groups: Registered
Joined: 8/11/2013(UTC)
Posts: 2

Thanks Denman, I will give that all a try. I appreciate the guidance.
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Kenmore Dryer too hot (Dryer Repair)
by Skyflyer 10/28/2009 5:29:57 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.