|Register | FAQ's | New Posts | Today's Posts | Extras|
New part has extra connector
Model Number: DV5471A Brand: Samsung Age: 1 - 5 years
I ordered a replacement heater assembly for my Samsung DV5471AEW/XAA electric dryer. I got the old one out only to realize that the new unit has an extra connector and I don't know what to do.
Here is a photo of the old unit. You will see that on the right side there is a two prong connector. The blue wire was on top and red on the bottom when I disassembled it.
The next photo is of the new unit. It has three prongs on the right side instead of two plus the thermostat in the center is oriented differently.
So I have three questions...
1) Is this the wrong part?
2) What do I do with the extra connection?
3) On the center thermostat which connector gets which wire? On the original the blue wires were always on top.
Last edited by Maestroc : 07-24-2013 at 07:16 PM.
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|extra part||rocknronnc||Dishwasher Repair||0||05-30-2013 08:22 PM|
|Extra Part. Help!!||Firewater||Dryer Repair||0||01-06-2012 06:01 PM|
|Extra part -||ginage||Refrigerator & Freezer Repair||0||05-01-2011 10:35 AM|
|Extra part in door- where does this go?||bethium||Oven Repair (including Ranges and Cooktops)||0||12-15-2010 08:37 PM|
|Extra Prongs on Replacement Part||mjohnson265||Oven Repair (including Ranges and Cooktops)||3||08-24-2010 07:30 PM|