Dryer Repair

preachergeek · #1 (**permalink**) 10-05-2009, 10:05 AM

Despite cleaning the lint filter and the heat exchanger, following the instructions in the manual, and cleaning all the lint out of all the nooks and crannies I can find, plus mopping up any water found within the appliance we are getting the "Clean the Lint Filter" indicator within minutes of starting the dryer. Am I missing a sensor or do I have a failing sensor? I have also ensured that the air inlet is not blocked as the manual suggests.

I would greatly appreciate any help you can give.

sidfink43 · #2 (**permalink**) 10-06-2009, 12:23 PM

I am afraid those of us who reply on this Forum are not really familiar with this brand, so I am going to suggest you post on another Forum and see if you can get someone to help you.

Sorry we could not be more helpful. Good luck

preachergeek · #3 (**permalink**) 10-06-2009, 01:36 PM

Quote:

Originally Posted by sidfink43

I am afraid those of us who reply on this Forum are not really familiar with this brand, so I am going to suggest you post on another Forum and see if you can get someone to help you.

Sorry we could not be more helpful. Good luck

Thanks for your quick answer.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
No Lint!!!	bmorgan	Dryer Repair	3	01-07-2010 05:53 PM
Lint bypassing lint screen	mlciancar	Dryer Repair	2	12-21-2009 05:53 AM
only part of lint screen catching lint	edmoore	Dryer Repair	1	11-17-2009 07:47 AM
oven sensor question/WB21T10007 GE Oven Sensor	lynnmta	Oven Repair (including Ranges and Cooktops)	0	07-18-2009 07:51 AM
lint	Bob J	Washer Repair	0	02-04-2009 12:55 PM

Lint Sensor

Dryer Repair

Despite cleaning the lint filter and the heat exchanger, following the instructions in the manual, and cleaning all the lint