Dryer Repair

jderenberger · #1 (**permalink**) 03-19-2013, 03:02 PM

I had to replace the felt slide on my dryer, and when I put it back together I ran a screw through one of the wires that go to the main control panel. The dryer made a pop noise when I started it, that is when I saw the problem. I spliced the wire back together and now the dryer works normal, Except it runs all the time the door is closed. If I open the door it stops, but as soon as I close it, the dryer starts running even if there is no time set.
Is the board shot?

denman · #2 (**permalink**) 03-20-2013, 01:40 AM

Here are your parts
Parts for Frigidaire FEQ1442ES1 Dryer - AppliancePartsPros.com

Here is the tech sheet
http://manuals.frigidaire.com/prodin...4509400efs.pdf

Yes, it does sound like the control board (item 1 in Control/Top Panel Parts section) is toast.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Amana dryer starts, burner lights, runs for a time , shuts off and can't re light.	jimmykhawk	Dryer Repair	0	08-22-2010 12:39 PM
Kenmore Gas Dryer runs and stops but starts right up every time i push button	gdel64	Dryer Repair	0	05-19-2010 08:28 PM
Runs All The Time	jarnold	Refrigerator & Freezer Repair	1	04-26-2010 05:19 PM
Runs all the time	mcraegaelic	Refrigerator & Freezer Repair	1	11-10-2009 05:54 AM
dryer heats but runs for a short time	suckleh0nny	Dryer Repair	8	11-10-2008 07:42 PM

Dryer runs all the time

Dryer Repair

I had to replace the felt slide on my dryer, and when I put it back together I ran a