Maytag dryer stuck in service mode
Model Number: MDG5806AWW Brand:
5 - 10 years
I have been having a few issues with my Maytag dryer. I put it into service mode, read and cleared the service codes. We ran it a few times and I went back into service mode to check if any of the errors reoccurred (they didn't) and I apparently entered the service cycle check. Now it seems to be stuck in a service or demo mode.
It sat untouched overnight (plugged in) and I unplugged for over 15 minutes.
When I plug it in, all the cycle select lights flash briefly twice, then the Regular light illuminates and stays on. I press the cycle select and the Drying light comes on (motor does not turn), a few seconds later the Drying turns off and Cool Down lights, a few seconds after that Wrinkle Prevent and Complete light, then, after a few seconds, Wrinkle Prevent turns off and just Complete is lit, then it goes off and just Regular is lit (which has been on continuously). About 10 seconds later (or if I rotate to Power Off and push cycle select), the lights around the cycle select knob light in sequence clock-wise, then counter clock-wise over and over.
Any suggestions or ideas?