|
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Dryer sparked near cord hookup |
|
|
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Model Number: MDE4000AYW Brand: Maytag Age: 5 - 10 years
I just bought a reconditioned dryer, installed the cord myself, and it has run fine for about 2 weeks. Today it suddenly sparked near cord, so I turned off the power, and took a look at the cord connection. I'm attaching a picture. The cord is fine, no damage. But one of the wires inside the machine that attaches to the connections block is fried. Did I cause this by installing the cord improperly? Or is the cord installed properly, and the dryer just malfunctioned?
Ads By Google Related Models |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
|
||||
|
Hi.
Shorten the wire by an inch or more and replace the connector. Make sure installing it back to tight it real good. Inspect the heating element and motor switch connections. Here are the breakdown diagrams and 03-Control Panel parts for Maytag MDE4000AYW - AppliancePartsPros.com Post the results. Simon.
__________________
Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here. |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Converting from a 3-prong cord to a 4-prong dryer cord | VLHastings | Dryer Repair | 1 | 11-17-2011 06:23 AM |
| power cord had short I fixed the cord and now nothing | tlh18 | Dryer Repair | 1 | 11-04-2011 03:31 AM |
| replacing Kenmore Washer power cord to ground it, change angle of cord | maddy | Washer Repair | 2 | 06-16-2011 09:01 AM |
| Plug Sparked when plugged in! | baysedge1121 | Oven Repair (including Ranges and Cooktops) | 1 | 02-10-2011 08:07 AM |
| Whirlpool stove sparked and stopped working??? | estiefaye1 | Oven Repair (including Ranges and Cooktops) | 0 | 08-07-2009 02:02 PM |