|
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Maytag dryer drum doesn't spin when on |
|
|
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Model Number: MED6600TQ0 Brand: Maytag Age: 1 - 5 years
I have a Maytag electric dryer. When I turn it on, the digital display comes on and works as normal. The heating element and the drum belt work. I took the top off and the drum spins normally when pushed manually. The dryer works as normal (clock ticks down, sensors detect wetness, etc), except the drum doesn't turn when the dryer cycle is started. When I ran the diagnostic test, it told me that the inlet thermistor was faulty. Would this cause the drum to not turn? It seems like that was for the heating element.
Ads By Google Related Models |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
|
|||
|
When you say that the " drum belt work", do you mean that it turns but slips on the drum?
Is the motor running? If not does it make any noise? Sounds like the belt is not on correctly. Take a look at the sticky (Dryer Belt Diagrams) at the start of this section.
__________________
- |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Maytag drum won't spin | Frustrated Homeowner | Dryer Repair | 0 | 07-18-2011 05:54 PM |
| How do you open up the Maytag Electric Dryer cabinet to get to the dryer drum belt? | Darrel Hedman | Dryer Repair | 1 | 05-13-2011 06:18 PM |
| Maytag washing machine drum does not spin | Bruce Kile | Washer Repair | 8 | 01-17-2011 08:47 AM |
| GE Dryer drum will not spin | jeffilano | Dryer Repair | 7 | 05-14-2009 04:17 PM |
| dryer drum won't spin | debsappliances | Dryer Repair | 0 | 06-09-2008 08:49 AM |