Dryer Repair

jack_c · #1 (**permalink**) 01-04-2013, 10:18 AM

R&R'd heating element but violated my own rule taking notes before removing bad heating element.

The element "tube" attaches to the rear of the drier via an "L" bracket and screw. This makes the tube pretty much level to the front of the drier.

BUT...now the cover and tube are way out of alignment. If I reattach the cover to the bottom of the drier via two screws, the cover doesn't come close to covering the tube!

Did I misplace a part during dis-assembly? It sure appears that I can't bend the tube down to attach the cover to it.

Hope you can help a REALLY frustrated DIYer!

Simon / APP Team · #2 (**permalink**) 01-04-2013, 10:55 AM

Hi.

Sorry, I don't quite understand what is the problem.Please use the attached parts breakdown to explain it.

04-Heater parts for Maytag DE312 - AppliancePartsPros.com

Simon.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Damaged Clear Cover on Metal Element Rod	kkrater	Oven Repair (including Ranges and Cooktops)	1	12-20-2012 10:43 AM
Reinstalling Oven Door - HELP	kenh99	Oven Repair (including Ranges and Cooktops)	3	10-02-2012 11:54 PM
getting the cover off the heating element	bgeldzahler	Dryer Repair	2	01-13-2011 05:33 AM
Replaced heating element now heating element nor broil element work, all else does	rontetley	Oven Repair (including Ranges and Cooktops)	1	10-26-2009 01:30 PM
bake element not heating but broil element heating okay	horno	Oven Repair (including Ranges and Cooktops)	1	10-04-2009 11:37 AM

reinstalling heating element cover

Dryer Repair

R&amp;R'd heating element but violated my own rule taking notes before removing bad heating element. The element &quot;tube&quot; attaches to

R&R'd heating element but violated my own rule taking notes before removing bad heating element. The element "tube" attaches to