[Dwayne Oxford]

Have occasional undesirable soot flake. Seeking counsel/ignorance relief before investigation. Thinking slight air adj. will suffice. Been many years since working on gas dryer.

[Simon / APP Team]

Hi.

Try to clean the orifice with the needle and adjust the air /gas mixture by moving the shatter.

Here are the breakdown diagrams and http://www.appliancepartspros.com/bu...g6151xsw1.html

Post the results.

Simon.

[Dwayne Oxford]

Can I do this from rear of dryer?

[Dwayne Oxford]

Peeked in rear, no access. Removed front. No adjustment provision. Has "square" air ports, 1 on top, other on bottom and 7/64" hole toward inside. Thinking of enlarging 7/64 hole. Any thoughts?

[Dwayne Oxford]

Jumped door switch, started dryer. Had big yellow flame. Removed orfice and it's 091. Conversion kit has 55 for butane, 54 for propane so don't think it's been converted to propane. How are orfices measured/sized?

[Dwayne Oxford]

Really overwhelmed with all the help y'all. Thanx a bunch! Seem to pretty much be talking to myself here 'cept for Simon.
As per Simon's request here's what I did. I plugged up the 091 orfice w/JB Weld, drilled it out w/#54 bit, reinstalled and fired 'er up. Good lookin' mostly blue flame. Put 'er back together and dried clothes. Hope this helps someone down the line. God bless, Dwayne