|Register | FAQ's | New Posts | Today's Posts | Extras|
Dryer not maintaining heat
Model Number: DG210 Brand: Maytag Age: More than 10 years
Igniter glows about 15 seconds, valve clicks, flame comes on 5 or 10 minutes
Then flame goes out and will not re-ignite.
After about 1 minute igniter glows about 15 seconds, valve clicks, no flame.
Outlet air is cool but the glow-click-no flame cycle repeates each minute.
The air ducts appear clean (right now it exhausts to open air).
The flame sensor is continuous (when cold).
3 thermostats checked within specification.
3 coils checked and are not open.
Any help would be appreciated.
Ads By Google
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|GE XL44 not maintaining temperature||pfabian||Oven Repair (including Ranges and Cooktops)||0||04-13-2011 05:07 PM|
|Freezer not maintaining temperature||Mikael688||Refrigerator & Freezer Repair||0||01-31-2011 05:04 PM|
|Jenn-air wall oven not maintaining target heat||rhiller||Oven Repair (including Ranges and Cooktops)||5||09-24-2010 07:17 AM|
|Whirlpool oven not maintaining heat||Fionan||Oven Repair (including Ranges and Cooktops)||1||07-04-2010 03:19 PM|