|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Kenmore Dryer - Ignitor glows for 10 seconds no flame |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
12-12-2012, 08:59 PM
|
|||
|
|||
Kenmore Dryer - Ignitor glows for 10 seconds no flame
Model Number: 110.74892401 Brand: Kenmore Age: More than 10 years
The ignitor glows for about 10 to 15 seconds, then there is a click and it goes out. The gas flame never lights. I have replaced the ignitor and the gas valve coils. If I bypass the flame sensor I can get the ignitor to stay on longer, but still do not get a flame. I get voltage to the coil on valve number one (the coil with three wires), but do not get a voltage reading for the main coil (with two wires). Could it be the gas valve? Is there anything else it could be? Thank you!
Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
12-13-2012, 06:47 AM
|
|||
|
|||
|
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Kenmore Dryer starts. No Ignitor, No flame no heat | jmrec100 | Dryer Repair | 1 | 12-12-2012 02:32 PM |
| Dryer Flame Goes out after 30 seconds | buschkt | Dryer Repair | 1 | 10-09-2009 06:28 AM |
| Gas oven ignitor glows, gas flows, no flame | bubba8cake | Oven Repair (including Ranges and Cooktops) | 4 | 07-11-2009 03:03 PM |
| Gas dryer, igniter glows but no flame | alpeters | Dryer Repair | 5 | 04-15-2009 06:07 PM |
| Kenmore Gas Dryer I can see the flame kick on for 30 seconds and shuts off. | cyberdata | Dryer Repair | 1 | 04-19-2008 07:14 AM |
Linear Mode
