Dryer Repair

slammpro · #1 (**permalink**) 05-23-2012, 02:34 PM

Ok, No heat but motor still runs and timer works. Heating element is good so are the thermostats and safety switches. Also checked for continuity on timer and heat select switch (all good). I have power at wall socket (220) and I even checked the power cord for continuity which is also ok. I hear the centrifugal motor switch close when I turn the start switch. I even checked for continuity of the wires to both sides of the motor switch and both sides of the heating element. I have good airflow in and out of the dryer. Can anyone tell me what I missed?

Simon / APP Team · #2 (**permalink**) 05-23-2012, 05:00 PM

Hi.

Make sure that you checked all four thermostats.See if you can trace the leg without the 120V.
The timer contacts B-A should be closed.

Not much left. Good luck.

Simon.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GE Profile Dryer	Bill LeVey	Dryer Repair	0	08-22-2011 05:47 AM
GE PRofile Dryer	mike223	Dryer Repair	1	03-27-2010 09:54 AM
GE profile dryer	beccab	Dryer Repair	0	03-27-2010 09:45 AM
GE Profile Dryer	hthcorp	Dryer Repair	1	11-24-2008 07:59 AM
GE Profile Dryer	abgdn.fireman4678	Dryer Repair	1	08-24-2008 08:06 PM

GE Profile Dryer

Dryer Repair

Ok, No heat but motor still runs and timer works. Heating element is good so are the thermostats and safety