Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
Dangilligan  
#1 Posted : Wednesday, September 9, 2009 5:34:55 PM(UTC)
Quote
Dangilligan

Rank: Member

Groups: Registered
Joined: 9/9/2009(UTC)
Posts: 2

Does a flame sensor have a normally closed or normally open position when bench tested for continuity?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
SublimeMasterJW  
#2 Posted : Thursday, September 10, 2009 6:59:18 AM(UTC)
Quote
SublimeMasterJW

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/6/2008(UTC)
Posts: 724

Was thanked: 1 time(s) in 1 post(s)
When cool and calm that sensor should have continuity. When heated to 1800 degrees F that puppy should shut down and allow all that shocktricity to empower them coils:
Dangilligan  
#3 Posted : Sunday, September 13, 2009 4:10:53 AM(UTC)
Quote
Dangilligan

Rank: Member

Groups: Registered
Joined: 9/9/2009(UTC)
Posts: 2

Thank you Sublimemasterjw. I have opted to order a flame sensor and an igniter. I was told that the igniter has about a 5 year life( dryer is 6yrs old). And I thought I would replace the flame sensor to remove it from the senairio. Thanks for the electrical advice. As an Electrician I not only understood it, but also enjoyed it. thanks again....dg
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Gas dryer flame sensor not tripping (Dryer Repair)
by Guest 6/1/2021 7:32:22 PM(UTC)
Dryer Flame Sensor (Dryer Repair)
by TomHam 9/3/2013 1:00:20 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.