Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
grega  
#1 Posted : Thursday, May 17, 2012 5:17:58 AM(UTC)
Quote
grega

Rank: Member

Groups: Registered
Joined: 5/17/2012(UTC)
Posts: 2

The bottom gas dryer is not getting hot. I ran the dryer in diagnostics mode and the dryer does not get hot at all. The ignitor is glowing red. I replaced the two coils for the gas valve and the dryer still does not get hot.

I am thinking that my next step is to replace either the radiant sensor or the Hi Limit thermostat. Please advise.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Simon / APP Team  
#2 Posted : Thursday, May 17, 2012 12:11:10 PM(UTC)
Quote
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556

Hi.

Does the ignitor switching on and off? If it's not - replace the flame sensor.
If it does and the gas to the dryer is open - you have bad safety gas valve.

The flame sensor Part number: 338906
Part number: 338906


The gas valve Part number: 308345
Part number: 308345


Here are the breakdown diagrams and Replacement parts for Maytag MHG15PDAWW MANUAL, PARTS (DRYER GAS) | AppliancePartsPros.com

Thank you. Post the results.

Simon.
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Stacked Maytag Gas Dryer-Top (Dryer Repair)
by grega 5/17/2012 5:26:39 AM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.