Dryer Repair

John Osgood · #1 (**permalink**) 03-18-2012, 11:25 AM

How much of the machine do I have to dismantal to get the belt over the drum.Need dyagram

JW Webster · #2 (**permalink**) 03-20-2012, 02:28 PM

You must first remove the top. Then remove the splash plate and the controls. They have quick connects. Remove the rear hatch. Get the front panel off and remove the drum. Clear out the lint and check the glides and the rear bearing. It seems tough but it is not that difficult.

Gene · #3 (**permalink**) 03-20-2012, 04:26 PM

Hi John,

You can use the instructions from the file attached to the reply. You have to read the first three pages only.

If the belt broke, just replace it.

If the belt fell off, inspect the idler pulley.

- The belt Part number: AP4565702

- The idler arm Part number: AP2132056

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
dryer belt replacement	lordemmett	Dryer Repair	3	11-24-2010 08:46 AM
belt replacement on old dryer	John Appairius	Dryer Repair	0	03-23-2009 07:02 PM
dryer belt replacement	jbmamaww	Dryer Repair	1	11-29-2008 03:29 AM
dryer belt replacement	kgnjay	Dryer Repair	1	03-05-2008 10:31 AM
dryer belt replacement	mamasue	Dryer Repair	0	08-14-2007 09:00 AM

Dryer Belt Replacement

Dryer Repair

How much of the machine do I have to dismantal to get the belt over the drum.Need dyagram Ads By