[mikeo1899]

Dryer doesn't get hot, I opened the front & the following is what I found. Looks like ignitor is working it glows & flame comes on for 5-10 second.
Then flame goes out. Any suggestions ?
Thanks,
Mike

[kayakcrzy]

Originally Posted by mikeo1899

dryer doesn't get hot, i opened the front & the following is what i found. looks like ignitor is working it glows & flame comes on for 5-10 second.
then flame goes out. any suggestions ?
thanks,
mike

mike unhook the vent hose from the back of the dryer and do the same test. feel and see if the air comes out hard where the vent is. if it does the same with the vent off, replace the coils on the gas valve. tom

[mikeo1899]

Thanks, I will try it later when I get home

[kayakcrzy]

Originally Posted by mikeo1899

Thanks, I will try it later when I get home

I hope all went well. Tom ********************************************

[mikeo1899]

I changed both coils and it works fine now
Thanks,
Mike

[kayakcrzy]

Originally Posted by mikeo1899

I changed both coils and it works fine now
Thanks,
Mike

Awesome!!! Tom ********************************************