[lt3]

gene and okbobcats thanks for your help ! gene i found a 1and a half inch paint brush , a wash cloth , sissors , a screw driver and 3 hand fulls of lint in the bottom of the lint trap by the blower . well now she dryed one load and now she has no power up stairs by the on button or at the timer . can you guys find it in your hearts to help me out again ? THANK YOU in advance for your time , and your advice

[lt3]

i've also checked i have power in on the cord , down to the one side of the thermal fuse but nothing going up to the timer or the push on button

[fyxer]

if the thermal fuse is ok and the dryer will not start check the door switch and the door switch actuater.

[lt3]

only one side was hot the other side was dead thanks

[lt3]

thanks that worked for one load ! then she died again with about 10 minutes left on the timer . what should i check now , other than current sale prices . this is like becoming a quest , fix this dryer or die trying . can you help ,or do i fold em and give in to the wifee ?

[Gene]

According to the manufacturer instructions if the thermal fuse blown, it has to be replaced together with the cycling thermostat.

- The part number for the thermal fuse is AP3132867

- The part number for the cycling thermostat is AP3115922

Good luck.
Gene.

[lt3]

thank you for your time and advice , im going to give it a shot tonight

[Gene]

Keep me updated.

Gene.